Download  Print this page

Battery Power Indicators - Philips MP2 Instructions For Use Manual

Intellivue patient monitor.
Hide thumbs

Advertisement

21 Using Batteries

Battery Power Indicators

The battery LED and battery status information on the Main Screen, in combination with INOP
messages and prompts, help you keep track of the battery power status. The indicators always show
the remaining capacity in relation to the battery's actual maximum capacity, which may lessen as the
battery ages. You can see the actual capacity in the
Battery LED
The battery LED on the front panel of the monitor is indicated by a battery symbol.
The battery LED is off during regular monitoring, when none of the following situations is present:
Battery LED Colors
Yellow
Red, flashing
Red, flashes
intermittently
Battery Status on the Main Screen
The battery status information includes the battery power remaining and, when the battery is not
charging, an estimate of the monitoring time this represents.
Battery power gauge:
This shows the remaining battery power. It is divided into sections, each representing 20% of the total
power. If three sections are filled, as in this example, this indicates that 60% battery power remains. If
no battery is detected, a blank battery gauge marked with a flashing red X is displayed. If no data is
available from the battery, a question mark is shown in the gauge. If the monitor is powered from the
Battery Extension, the battery gauge shows the remaining power for the battery in the Battery
Extension.
250
Battery Status
If the monitor is connected to
the external power supply
(M8023A), this means
battery charging
battery or charger malfunction
window.
1
Battery LED
If the monitor is running on
battery power, this means
less than 10 minutes power
remaining
battery malfunction

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: