19 Printing Patient Reports
To allow the report to print, you must either solve the problem with the target printer, or re-route the
print job to another printer with paper of the correct size. To re-route a print job,
Enable the new target printer by selecting it in the
the monitor tries to send the report to the printers in the order they are listed, you must make sure
that all the printers above the new target printer are disabled.
If the target device of the print job was set to a specific printer, re-routing is not possible.
Checking Report Status and Printing Manually
A list of all print requests which are waiting, printing or stored can be viewed in the
view the list, in the
The following information is displayed for each print request:
Patient name (except for system reports such as the battery status report)
Request date and time
Report paper format
Individual reports can be deleted from the list with the
Delete All Repts
title and date. It is advisable to provide controlled access to this data to ensure confidentiality.
Those jobs shown in black will be printed automatically when a matching printer is available. If the
Auto Print Dbs
will be shown in gray. Any jobs shown in gray must be printed manually; to do this,
includes privacy information, in the form of the patient name with the related report
, select the required report
Print All Reps
will send all reports to the printer.
, some or all reports will not be printed automatically and
menu and toggling to
key, and all reports with the