Download  Print this page

Recorder Status Messages - Philips MP2 Instructions For Use Manual

Intellivue patient monitor.
Hide thumbs

Advertisement

Speed
Delay Time
the recording is started. This interval is called the "Delay Time" and can be set as specified in
"Overview of Recording Types" on page 232. This setting can only be changed in Configuration
Mode.
Run Time
changed in Configuration Mode. Continuous recordings run indefinitely.
Central Config
made for the centrally-connected recorder.
Maintaining Recording Strips
Recording ink sometimes fades when covered with transparent tape. Avoid covering any part of a
recording that is clinically relevant (annotation or waveforms) when taping a recording strip to a
patient record or other patient documentation.

Recorder Status Messages

CAUTION
If no central recorder is available, alarm recordings may be lost. The message
will be displayed. This message is not shown if
available
destination.
Recorder Status Messages
<Recording Name> running
No alarm recording available
Central Recorder out of paper
Central Recorder door open
: choose the recording print speed.
: Delayed recordings start documenting on the recorder strip from a pre-set time before
: see how long this type of recording is configured to run. This setting can only be
- if available in the
General
menu, select this setting to use the recording settings
is configured as the alarm recording
Printer
Explanation
The named recording is currently running.
No recorder available. Alarm recordings will be lost.
Try configuring
destination.
The named recorder is out of paper.
The door of the specified recorder is open.
18 Recording
No alarm recording
as the alarm recording
Printer
233

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: