Download  Print this page

Setting Up Trends - Philips MP2 Instructions For Use Manual

Intellivue patient monitor.
Hide thumbs

Advertisement

17 Trends
Aperiodic values are shown with a timestamp
1
Scroll to view more pop-up keys
2
The currently-selected column is highlighted. The values can be configured to display in the same
colors as the waves and numerics on the realtime display.
Any values available for display before the next scheduled update are shown in the right hand column,
with a timestamp in brackets.
If more than one value is available for an aperiodic trend for a certain trend period, all measured values
are stored in the database and the value closest to the timestamp is shown in the Vital Signs display
marked with an arrow.
To view the Vital Signs trend with one column for each NBP measurement (see "Defining the Column
Interval Using the NBP Measurement" on page 227):
With the Vital Signs trend open, select
1
Select
2

Setting Up Trends

Trends are set up in Configuration Mode. You can make temporary changes to trends settings such as
trend groups, priorities, or scales in Monitoring Mode. The general settings for all Trends are under
Main Setup
Settings for a single segment in graphical trends or for the corresponding trend group can be made
more easily in that segment menu.
Making Segment Settings
The
Graphical Trends
settings.
To enter the segment menu,
select the left hand column of the segment, where the measurement label is displayed.
Expanded View
To expand the segment to fill the
in the
In the expanded view, you can also highlight a measurement to make it more easily visible (for example
when multiple ST trends are in one segment). To highlight a measurement,
in the
measurement.
To return the segment to its original size,
in the
Trend Scales for Segment Measurements
To change the trend scales for a measurement in the current segment:
In the
1
2
Select
224
from the pop-up list.
NBP
,
Trends
.
window is divided into measurement segments, each of which has its own
Graphical Trends
menu, select
Segment
Expand
menu, select
Segment
Highlight
menu, select
Segment
Expand
menu, select the measurement label.
Segment
Upper
to change the upper limit of the scale or
.
Interval
window,
to have that segment enlarged to fill the window.
repeatedly until the highlight is on the required
again.
Lower
to change the lower limit of the scale.

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: