Download  Print this page

Advertisement

1 Basic Operation
Alarm lamps (see "MP2 Controls and Indicators" on page 16)
4
Built-in carrying handle
5
6
Battery eject button
Keys (see "MP2 Controls and Indicators" on page 16)
7
Measurement connectors (see "MP2 Patient Connectors, Right Side" on page 17)
8
Battery
9
MP2 Controls and Indicators
On/Standby switch
1
2
On/Standby LED. Green when monitor is on. Red indicates an error.
Battery status LED. Yellow when charging. Flashing red when battery is empty, or a battery
3
malfunction is detected.
External power LED. Green when monitor is powered from an external power source.
4
5
Alarms off indicator. When alarms are suspended, the lamp is red, and the
appears on the screen.
Active INOP alarm lamp in light blue. Stays lit until active INOP is acknowledged.
6
7
Active alarm lamp. Red or yellow, depending on alarm level. Stays lit until active alarm is
acknowledged.
Silence key
8
9
Alarms key: turns alarms On/Off, or pauses them
SmartKeys key: brings up SmartKeys on the screen
10
Main Screen key: closes all open menus/windows and returns to the main screen, or selects
11
current screen.
16
Alarms Off
message

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: