Download  Print this page

Information Center Compatibility - Philips MP2 Instructions For Use Manual

Intellivue patient monitor.
Hide thumbs


Information Center Compatibility

The functionality available for managing patients and equipment depends on the IntelliVue
Information Center being used. In the following table the main differences between the PIIC and
PIIC iX are shown.
Not available
Transfer Patient
Not available
Add Equipment
telemetry devices via manual pairing.
equipment - allows only removal of
telemetry devices via
Unpair To Tele
Not available
Not available
Not available
- patient is moved to transfer
- allows only assignment of
Unpair To Mon.
5 Managing Patients and Equipment
Find Patient
- searching for a patient in the Information
Center or other connected hospital systems. (With
LAN and WLAN connection only)
- can transfer patient directly to
Transfer Patient
another bed/unit and from another bed/unit. (With
LAN and WLAN connection only)
A unique patient list provides information about the
current status of a patient allowing intelligent prompts
and preventing the same patient being admitted twice.
Add Equipment
- allows assignment of other monitors,
telemetry devices and X2 MMS. (With LAN and
WLAN connection only)
equipment - allows removal of other monitors,
telemetry devices and X2 MMS.
Select Location
- allows a temporary location to be
shown when a patient is not in the unit. (With LAN
and WLAN connection only)
- allows a Caregiver to be assigned to a
Select Caregiver
Paced status
paced status has been entered.
pace pulse rejection on but makes the user aware that
no paced status has been selected.
is the initial setting before a
will switch


Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: