N5696-M12Q - Cisco Nexus 5600 Series Hardware Installation Manual

Cisco Nexus 5696Q
Table 1-9
Part Number
N5696-M4C
N5696-M4C=

N5696-M12Q

N5696-M12Q=
N5696-M20UP
N5696-M20UP=
N6004X-M20UP
N6004X-M20UP=
The software does not support hot swap of the expansion modules during their operation. You must
Caution
power off the module before removing it, though the switch can stay powered on.
For the most current list of supported transceivers, refer to the Cisco Nexus 5600 Release Notes
Note
document at every release.
N5696-M12Q
The Cisco Nexus 5696-M12Q Generic Expansion Module (GEM) provides 12 40 Gigabit QSFP+
Ethernet/FCoE ports, as shown in
on the QSFP+ ports. You can configure a total of eight 5696-M12Q modules in a Cisco Nexus 5696Q
switch to provide a total of 96 40 Gigabit Ethernet connections.
Cisco Nexus 5600 Series Hardware Installation Guide
1-14
Supported Expansion Modules for Cisco Nexus 5696Q
Details
Cisco Nexus 5696Q Chassis Module 4C 100GE Ethernet
Cisco Nexus 5696Q Chassis Module 4C 100GE Ethernet, Spare
Cisco Nexus 5696Q Chassis Module 12Q 40GE Ethernet/FCoE
Cisco Nexus 5696Q Chassis Module 12Q 40GE Ethernet/FCoE, Spare
Cisco Nexus 5696Q Chassis Module 20P 10GE Eth/FCoE and 8/4G FC
Cisco Nexus 5696Q Chassis Module 20P 10GE Eth/FCoE and 8/4G FC,
spare
Cisco Nexus 6004X Chassis Module 20P 10GE Eth/FCoE and 8/4/2G
FC
Cisco Nexus 6004X Chassis Module 20P 10GE Eth/FCoE and 8/4/2G
FC, Spare
Figure 1-8. The expansion module supports native 40 Gigabit Ethernet
Chapter 1 Overview