Meat Locker And Cover; Crispers And Crisper Cover - Whirlpool 1VET27DKGW1 Use & Care Manual

ROLLER TRAC*
To remove the meat locker:
1. Slide meat locker out to the stop.
2. Lift front of meat locker with one hand while supporting bottom of
meat locker with other hand. Slide meat locker out the rest of the
way.
Replace the meat locker in the reverse order.
To remove the cover:
1. Remove meat locker.
2. Tilt front of cover up.
3. Lift back of cover.
4. Pull cover straight out.
To replace the cover:
1. Guide the cover's rear hooks into the slots in the shelf supports on
rear wall of refrigerator.
2. Tilt cover up at the front until the rear hooks drop into the slots.
3. Lower front of cover to a level position and replace meat locker.
NOTE: The meat drawer can be located on the left or right side. We
suggest that you place the meat drawer on the same side as the
refrigerator door handle.
ROLLER TRAC*
The crispers are designed to keep fresh vegetables and fruits longer.
To remove shelf and crispers:
1. Open left crisper. For doors hinged on left, open right crisper.
2. Remove shelf by gently pushing up from underneath. Tilt one end up
then pull out.
3. Remove left crisper by lifting front while supporting underneath, then
pulling out. For doors hinged on left, remove right crisper.
4. Remove support post at recess in bottom center of Fresh Food
section.
5. Remove other crisper by sliding to opposite wall. Lift front while
supporting underneath then pull out.
6. Replace crisper and shelf by reversing steps 1-5.

Meat locker and cover

Crispers and crisper cover

13