Operation - Panasonic CF-18 Series Operating Instructions Manual

Hide thumbs Also See for CF-18 Series:
Table of Contents

Advertisement

First-time Operation
12
Create BACKUP Disks for Reinstallation
To create backup disks, the USB floppy disk drive (optional: CF-VFDU03) and formatted
2HD floppy disks are needed.
1
Connect the USB floppy disk drive to your computer.
NOTE
The floppy disk drive must be the A drive.
Prepare 2HD floppy disks and make sure they are
2
not in the write-protected state, and then set it.
3
Select [start] - [All Programs] - [Panasonic] - [Cre-
ate Backup Disk] and follow the on-screen instruc-
tions.
Place a label identifying the contents on each disk.
4
Name of created backup disk
FIRSTAID FD (When the display for creating the
UPDATE FD is shown, create the disk by follow-
ing the on-screen instructions.)
CAUTION
Store the floppy disks in a safe place. They will enable you to return your com-
puter to the condition at the time of purchase should any problems occur.
When creating backup disks, do not run any other application program.
When creating backup disks and the message [Insufficient files to copy] is dis-
played, select [OK] and then contact Panasonic Technical Support.
While the floppy disk drive indicator is on, do not remove the floppy disk,
power off the computer or use the standby or hibernation function (
"Standby/Hibernation Functions").
Be sure to create the backup disk.
If a backup disk is not created, it will be impossible to return the computer to its
original state. In this case, contact Panasonic Technical Support.
This concludes the first-time use operation guidelines.
USB Floppy
Disk Drive
Label on the top surface,
and insert the shutter-
side headfirst.

Advertisement

Table of Contents
loading

Table of Contents