Page 1
CEILING FAN LIGHT KIT Owner’s Manual Models #20564 RATED FOR DAMP LOCATION If a problem cannot be remedied or you are experiencing difficulty in installation, please contact the Service Department: 1-877-459-3267, 9 a.m.- 5 p.m. Central time. Turn of the Century 9151• 120515...
Page 2
The following tools are required to install the light kit (not included): Phillips Screwdriver and Step Ladder The following tools may also be needed to install the light kit (not included): Gloves, Safety Glasses, Wire Cutters and Wire Strippers Turn of the Century...
Page 3
• If using the fan in a damp location, the fan must be connected to a supply circuit that is protected by a Ground Fault Circuit Interrupter (GFCI) to reduce the risk of personal injury, electrical shock or death. NOTE: The net weight of the light kit is less than: 4.4 lbs. Turn of the Century...
Page 4
Note: Save the three switch housing screws for later. Switch Housing Cap Switch Housing Screw 4. Use a screwdriver to push the plug button out of the switch housing (A) or switch housing cap (B). Switch Housing Plug Button Switch Housing Cap Plug Button Turn of the Century...
Page 5
(A) or the switch housing cap to the switch housing (B). Switch Housing Screw Switch Housing Screw 8. Install the three candelabra-base bulbs in the sockets. Bulb Socket Turn of the Century...
Page 6
Glass Bowl Finial Cap Finial 11. Attach the pull chain extensions to the pull chains. Pull Chain Extension 12. Restore the power at the main fuse or circuit breaker. Turn of the Century...
Page 7
1-877-459-3267, 9 a.m.- 5 p.m. Central time. Model Name: Ceiling Fan Light Kit Model No: 20564 - Bronze (SKU: 355-3190) The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for one (1) year from the date of purchase. If within this period the product is found to be defective, take a copy of the bill of sale as a proof of purchase and the product in its original carton to the place of purchase.
Need help?
Do you have a question about the 20564 and is the answer not in the manual?
Questions and answers