Philips 6400 Installation Manual page 29

Getting the iPronto Up and Running
4 If your Proxy uses password authentication, select the Use Password Authentication checkbox.
The Username and Password text boxes are activated.
1 In the Username text box, enter your username.
2 In the Password text box, enter your password.
Testing the Network and Internet Connection
After setting the network settings, you can test whether the iPronto is able to communicate with your network and with
the Internet:
1 Press layout button 8 (at the bottom) in the touchstrip.
If all settings are correct, the home page of the iPronto Portal appears.
2 If the iPronto Portal does not appear, recheck the settings in this chapter or go to Troubleshooting on
page 56.
3 After defining new settings, tap the
If the new settings are correct the iPronto Portal appears.
After setting the wireless settings and network settings, the iPronto is ready for use. In the next chapter, Using the
iPronto, you learn the basics: using the touch screen, what the buttons are for, how you navigate on the iPronto
and so on.
iPronto User Guide
button to reload the iPronto Portal page in layout 8.
26