Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BENE AL/P2
Summary of Contents for BENE AL/P2
- Page 1 AL / p2 BACKBOARD WITH SCREENLIFT Safety and operating inStructionS note please read all instructions carefully before operating the system. Keep instruction manual for further reference. this document is alternative available on the official Bene - homepage. (www.bene.com)
-
Page 2: Table Of Contents
contentS contents ......... 2 product overview ......3 Safety instructions ......4 ce certificate of conformance ... 8 Mount/adjust the monitor on the screen lift ......9 adjust the arm of the screen lift ..10 plug in/wire the monitor ....11 Levelling ........ -
Page 3: Product Overview
product oVerView max. screen width = 1215 flap width 1263 max. screen width = 1360 Version 2 1/2 oH Version 2 oH flap width 1408 (=binder height) (=binder height) Monitor dimensions: aL our field staff will be glad to talk about choosing the Monitor dimensions: p2 height: max. -
Page 4: Safety Instructions
Safety inStructionS please observe the safety instructions! 6. Make sure adjacent objects are placed at Improper operation of the system may a minimum distance of 25 mm to prevent result in personal injury and cause them from being squeezed or sheared! damage to objects! 7. - Page 5 Safety inStructionS 10. do not change or modify the control they are supervised by a person mechanism or the operating device. responsible for their safety or received instructions about how to use the appli- 11. never open the enclosure of the control ance.
- Page 6 Safety inStructionS 19. furniture with flexible or height-adjustable 22. the operation of the control mechanism components require special care. cables and the power supply unit requires a must be sufficiently long to allow height minimum of 5°c and a maximum adjustments without damaging the cables temperature of 40°c.
- Page 7 Safety inStructionS Warning: in the event of a fault it is 23. after 2 minutes of continuous operation possible that the table top moves a bit the system automatically shuts itself off during every attempt whilst operating and cannot be used for an additional before the safety switch off kicks in.
-
Page 8: Ce Certificate Of Conformance
ce certificate of conforMance... -
Page 9: Mount/Adjust The Monitor On The Screen Lift
Mount/adjuSt tHe Monitor on tHe Screen Lift 1. Screw the bracket to the monitor. 2. adjust the support arm of the monitor so that the top edge of the monitor stands about 5 mm back from the screen lift column (see page 7, no. 5). 3. -
Page 10: Adjust The Arm Of The Screen Lift
S/M button six times, and then press the““ button. the column then read the instructions for the monitor (inclu- moves at half speed up to the maximum extension as long as you hold down ded) and the screen lift (can be obtained at the ““ button. bene.com) before startup. -
Page 11: Plug In/Wire The Monitor
pLug in/wire tHe Monitor Manual control ir-receiver column connection MediaBridge (optional) Safety sensor cables and plugs Mediaport (optional) power audio the monitor only shuts off automatically when the power is supplied through the control unit. -
Page 12: Levelling
LeVeLLing adjustable leg p2 adjustable leg aL... -
Page 13: Level The Screen. Adjust The Locking Bar
LeVeL tHe Screen. adjuSt tHe LocKing Bar Make sure the hinged doors lock and adjust the pawls if necessary. -
Page 14: Handover Checklist
HandoVer cHecKLiSt ‡ is the monitor plugged into the control? ‡ does the monitor automatically turn off returning to default position? ‡ are all the monitor cables in the cable duct and fastened with strain reliefs? ‡ are all the cables run so that they are not exposed to crushing and abrasion? ‡... -
Page 15: Cleaning Instructions. Certificates
Bene products can be found in ing silicon, caustic cleaning agents with ammonia additives, the sustainability report at: http://www.bene.com... - Page 16 Bene plays a leading role in responsible environmental management. it is practiced throughout all company divisions -from product development, procurement, production and logistics to product recycling. Bene considers ecology to be a central element of its responsible and stable corporate strategy. Bene sees the legal regulations as minimum requirements and strives for better and more sustainable environmental protection throughout the group.
Need help?
Do you have a question about the AL/P2 and is the answer not in the manual?
Questions and answers