Installation
April 2017
12.
13.
14.
6
Connect the VP cable to the sensor. The sensor
connector is keyed to ensure proper mating with the
cable receptacle. Once the key has slid into the mating
slot, hand tighten the connection by turning the
knurled ring clockwise.
Place the sensor in the flow cell. Be sure the capillary
disc faces forward. Tighten the flow cell nut.
Adjust the sample flow until it is between 1 and 3 gph
(60 to 180 mL/min). For best results flow should be
constant.
Instruction Manual
LIQ-MAN-3200HP
Figure 2-7: Rosemount 3200HP
Installation