Installation - Sony CDX-G1202U Operating Instructions Manual

Common connection
Red
Yellow
continuous power
12
supply
15 switched power supply
When the positions of the red and
yellow leads are inverted
Red
Yellow
12 switched power supply
continuous power
15
supply
When the car without ACC position
Red
Yellow
After matching the connections and
switching power supply leads correctly,
connect the unit to the car's power supply. If
you have any questions and problems
connecting your unit that are not covered in
this manual, consult the car dealer.
Using the wired remote control
1
To enable the wired remote control,
set [STR CONTROL] in [SET STEERING]
to [PRESET] (page 10).
Red
Yellow
Yellow
Red
Red
Yellow
Yellow
Red
Red
Yellow

Installation

Removing the protection collar
and the bracket
Before installing the unit, remove the
protection collar  and the bracket  from
the unit.
1
Pinch both edges of the protection
collar , then pull it out.

2
Insert both release keys  until they
click, and pull down the bracket ,
then pull up the unit to separate.


Face the hook inwards.
23
GB