Your Resound V Set-Up; Stand-By Function; On/Off Function - ReSound V 70 Operating Instructions Manual

your ReSound V set-up

Basic
Comfort Mode
Telecoil
Telecoil

Stand-by Function

To put the instrument into stand-by mode, hold down the
mode selector for 5 seconds. You will hear a series of beeps,
and the device is now in stand-by mode. Before returning
to functional mode, you will need to wait approximately 5
seconds. After waiting, press the mode selector down once.
Please note that the instrument is using a small amount of
power when in stand-by mode.

On/Off Function

Your ReSound V BTE (Behind-The-Ear) is equipped with
an on/off switch integrated into the battery compartment.
When the battery compartment is fully closed, the instru-
ment is turned on in its functional mode and the basic pro-
gramme will be activated. To turn the instrument off, press
the tab on the base of the instrument with your fingertip.
The battery compartment then snaps partly open and the
instrument is turned off. Whenever you are not wearing the
instrument, remember to turn it off to reduce battery con-
sumption.
15674700-GB-10.09 Rev.B.indd 7
( ) Microphone/Telecoil
( )
( )
7
24-09-2010 10:05:15