Control Panel - AEG BY9314001 User Manual

• Install the appliance in its permanent
location.
• Connect the appliance to the mains
supply and do not disconnect it again.
• If you change the appliance location
or electrical connection, you must do
the steps again.
Calibration:
1. Activate the appliance.
2. Select Basic Settings and press OK.

6. CONTROL PANEL

6.1 Control Panel
Use the sensor fields to operate the appliance
Num-
ber
1
2
3
4
5
Electronic programmer
1
Sen- Function
sor
field
-
ON / OFF
-
Time and additional functions To set different functions.
3. Select Calibration and press OK.
2 3
10
Display
Shuttle
Baking
When you calibrate for the first
time, you can set the category
from the control panel or Auto
Cooking from the main menu to
start the procedure.
CAUTION!
Make sure that the appliance is
cool before you use it.
4 5 6 7
Comment
Shows the current settings of
the appliance.
To activate and deactivate the
appliance.
To select a position in the
menu.
When a heating function oper-
ates, touch the sensor field to
set the timer, Favourite Pro-
gramme , Function Lock or to
change the setting of the Core
temperature sensor .
A category of the automatic
programmes.
ENGLISH
9
8 9