Table of Contents
Advertisement
The next few pages tell you, step by step, how to configure your network settings based on the type of Windows
operating system you are using. Make sure that an Ethernet card or adapter has been successfully installed in
each PC you will configure. Once you've configured your computers, continue to "Configure the Router"
Configuring Windows 95, 98, and Millennium PCs
1.
Go to the Network screen by click the Start button. Click Settings and then Control Panel. From there,
double-click the Network icon.
2.
On the Configuration tab, select the TCP/IP line for the applicable Ethernet adapter. Do not choose a
TCP/IP entry whose name mentions DUN, PPPoE, VPN, or AOL. If the work TCP/IP appears by itself, select
that line. (If there is no TCP/IP line listed, refer to "Appendix D: Installing the TCP/IP Protocol.) Click the
Properties button.
20
Advertisement
Table of Contents
