Table of Contents
Advertisement
Ports 1-4
These four LAN (Local Area Network) ports are where you will connect networked devices, such as PCs,
print servers and any other Ethernet devices you want to put on your network. If Port 4 is being used, the
Uplink Port will not work.
Cable
The Cable Line Port (Coaxial Copper).
Wireless
The Wireless Network PC Card is inserted into this slot to enable the wireless features. This slot is not
PC Card
hot swappable.
Reset
Briefly pressing the Reset Button will refresh the Router's connections, potentially clearing any jammed
links. Pressing the Reset Button and holding it in for a few seconds will clear all of the Router's data and
restore the factory defaults. This should be done only if you are experiencing heavy routing problems,
and only after you have exhausted all of the other troubleshooting options. By resetting the Router, you
run the risk of creating conflicts between your PCs' actual IP Addresses and What the Router thinks their
IP Addresses should be. You may be forced to reboot the entire system(s). If your Router locks up, simply
power it down for 5 seconds by removing the power cable from the Router's Power Port. Leaving the
power off for too long could result in the loss of network connections.
16
Advertisement
Table of Contents
