Maintenance - Makita 9910 Instruction Manual

Hide thumbs Also See for 9910:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 4
Speed adjusting dial (Fig. 7)
For 9911 only
The belt speed can be infinitely adjusted between 75 m and 270 m per minute by turning the speed adjusting
dial to a given number setting from 1 to 6. Higher speed is obtained when the dial is turned in the direction of
number 6; lower speed is obtained when it is turned in the direction of number 1. Select the proper speed for
the workpiece to be sanded.
CAUTION:
The speed adjusting dial can be turned only as far as 6 and back to 1. Do not force it past 6 or 1, or the speed
adjusting function may no longer work.
Clamps (optional accessory) (Fig. 8)
This tool can be operated in the inverted position. To do so, secure the tool to a stable workbench with two
clamps as shown in Fig. 8.
Connecting to Makita vacuum cleaner or dust collector
Cleaner sanding operations can be performed by connecting the belt sander to Makita vacuum cleaner or dust
collector.
When connecting to Makita vacuum cleaner (Model 406/431), an optional hose 28 mm in inner diameter is
necessary. See the figure below.
+
+
Makita vacuum cleaner
Hose of vacuum cleaner
Optional hose 28 mm in inner dia
When connecting to Makita dust collector (Model 420), the optional hose is not necessary. You can connect
the belt sander directly to the hose of the dust collector.

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Replacement of carbon brushes
(Fig. 9, 10 & 11)
Replace carbon brushes when they are worn down to
the limit mark. First, remove the belt cover from the
tool, then replace the carbon brushes. Both identical
carbon brushes should be replaced at the same time.
To maintain product safety and reliability, repairs,
maintenance or adjustment should be carried out by
a Makita Authorized Service Center.
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

9911

Table of Contents