Sharp DV-NC150U Service Manual page 57

Main 8/8 Schematic Diagrams < VCR Section >
CAUTION
FOR CONTINUED PROTECTION AGAINST FIRE HAZARD,
F REPLACE ONLY WITH THE SAME TYPE FUSE.
ATTENTION : POUR UNE PROTECTION CONTINUE LES RISQES
A V D'INCELE N'UTILISER QUE DES FUSIBLE DE MÊME TYPE.
RISK OF FIRE-REPLACE FUSE AS MARKED.
"This symbol means fast operating fuse."
"Ce symbole reprèsente un fusible à fusion rapide."
1-12-17
NOTE: CBA AND PWB MEANS PRINTED WIRING BOARD.
CAUTION !
Fixed voltage ( or Auto voltage selectable ) power supply circuit is used in this unit.
If Main Fuse (F1001) is blown, check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.
NOTE :
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.
1-12-18
MAIN 8/8
Ref No. Position
IC
IC1001 AP-1
TRANSISTORS
Q031 AQ-1
Q1001 AP-3
Q1003 AO-3
Q1008 AO-2
H9641SCM8