Talkabout two-way radios have 14 channels. To communicate with others, all radios in your group must be set to
the same channel and Interference Eliminator Code.
Turn The Radio On:
1. Rotate Power/Volume knob clockwise until you hear a click. Radio will beep and LED Indicator Light will flash
to confirm. All icons on the display will light up briefly, then the current channel and code will show. LED will flash
every three seconds.
2. To turn radio off, rotate Power/Volume knob counter clockwise until you hear a click and display disappears.
The Scan/Monitor button on T5410 (Monitor ONLY button on T5320 and T5420) lets you hear the radio's
volume level when you are not receiving so you can adjust the volume. It is also used to check activity on
current channel before transmitting. To use the Monitor feature, press and hold the Scan/Monitor button on T5410
(Monitor ONLY button on
T5320 and T5420).
Channel Busy Indicator:
The radio also has a Channel Busy Indicator where the LED will also flash twice per second to indicate the
channel frequency is in use.
Adjust The Volume:
Rotate Power/Volume knob while holding down the Scan/Monitor button on T5410 (Monitor ONLY button on
T5320 and T5420) until you reach a comfortable listening level. Rotate knob clockwise to increase and counter
clockwise to decrease volume.