Select Base - Philips ID937 User Manual

:
Number
3. Scroll to
4. The last stored Baby Call number is displayed (if any).
5. Enter the new Baby Call number and press
A validation tone is emitted and the screen returns to previous menu.
Registration
The procedures described below are the procedures that you will find in your ID937 handset. The procedures
may vary according to the handset you want to register. In this case, please refer to the manufacturer of the
additional handset.
Additional handsets must be registered to the base unit before you can use them. Up to 6 handsets can be
registered to one base station.
The Master PIN is required before you can register or unregister handsets. The default PIN is 0000.
To register an additional handset
1. On the base station, press and hold
done within 1 minute.
Within 1 minute, the base station is able to accept registration from a handset. If there is no action
taken on the handset within 10 seconds, the registration procedure will be aborted.
2. At the same time, on the handset, press
:
Registration
scroll to
:
3. Press to select the Base to be registered to and press
4. Enter the Master PIN when prompted and press
If the PIN is incorrect,
A validation tone is emitted to indicate successful registration and the screen returns to stand-by mode.

Select Base

One ID937 handset can be registered to up to 4 different ID937 Base stations. By default, the handset will reg-
ister to BASE 1. If you select
To manually select best base station
m
1. Press , scroll
MENU
m
SELECT .
:
2. Scroll to the desired base station and press
3. The handset will start searching for the base station. If the selected base is found, a validation tone is emit-
ted.
Advanced Settings
m
and press SELECT .
m
p
for 3 seconds. After that, the registration procedure has to be
m
MENU
m
and press SELECT
Incorrect PIN will be displayed and the handset returns to stand-by mode.
Best Base, the handset will register to the nearest base station.
:
to Advanced Set and press
OK to confirm.
:
, scroll to Advanced Set
.
m
to confirm.
OK
m
OK to start registration.
m
, scroll
SELECT
m
to confirm.
OK
m
and press
SELECT
:
to Select Base and press
EN
,
41