Notice for use
Product overview
Adjusting the tilt
To set up your monitor, please see the illustrations below�
Note: Do not touch the monitor within the screen area� The screen area is glass and can be
damaged by rough handling or excessive pressure�
1�
Place your monitor with the screen face down on a soft flat surface.
2�
Align the stand assembly bracket to the monitor�
3�
Insert the bracket towards monitor until it locks in place�
Note: Remove the screws from base before detaching base and stand from the monitor�"on page
2-11"�
This section will provide information on adjusting monitor positions, setting user controls, and
using the cable lock slot�
Please see the illustration below for an example of the tilt range�
0°
Chapter 1� 1-2