Advertisement
PTVwire
USB to HDMI Adapter
Quick Start Guide
Rev. 1.0
Introduction
Thanks for choosing PTVwire! The PTVwire contains the cutting-
edge PTVwire technology, and firmware upgrade will be provided
accordingly in order to compatible with latest devices. Please read the
installation guide below to setup your PTVwire. Let's enjoy mirroring!
support@ptvdisplay.com
Advertisement
Table of Contents
Summary of Contents for PTVwire CA04F
-
Page 1: Quick Start Guide
Thanks for choosing PTVwire! The PTVwire contains the cutting- edge PTVwire technology, and firmware upgrade will be provided accordingly in order to compatible with latest devices. Please read the installation guide below to setup your PTVwire. Let’s enjoy mirroring! support@ptvdisplay.com... -
Page 2: Hardware Installation
(3) Connect the lightning plug with your iOS* device * Support iOS9 and above (4) If the HDMI source is set correctly, you should see the PTVwire setup screen on TV (5) Wait for a few seconds for initialization*, the screen of your iOS device will be shown on TV. -
Page 3: Firmware Upgrade
Firmware Upgrade (1) Insert a paper clip into the hole on the PTVwire dongle, and push the key inside the hole to enable HotSpot mode (Internet) (2) Enable “Personal HotSpot” of your iOS* device Note: Cellular (3G/4G) data is needed at your iOS device, (3) Download “EZCast”... - Page 4 Output Resolution (1) Insert a paper clip into the hole on the PTVwire, and push the key inside the hole to enable HotSpot mode (Internet) (2) Enable “Personal HotSpot” of your iOS* device Note: Cellular (3G/4G) data is needed at your iOS device, (3) Launch EZCast App.
Need help?
Do you have a question about the CA04F and is the answer not in the manual?
Questions and answers