Connecting To Your Mobile Phone - Sanyo Wipoq User Manual

02
02

connecting to your mobile phone

You will need to establish a Bluetooth
your mobile so you can begin sending messages
and accessing the internet via your phone's
network connection.
1 Use the Tab key to move to the My WiPOQ
screen and select the Settings option.
2 Within the Settings menu, use the Tab key to
move to the Bluetooth screen.
3 Make sure the Bluetooth is enabled on your
®
mobile (refer to your phone's user guide for
details).Then press the Menu button on your
WiPOQ keypad and select Start Search.
4
Choose your phone from the list of
discovered devices and confirm using the
Select key.
5 You will be asked to confirm that you wish
to pair with the selected device. If your
WiPOQ is already paired with another
device this will be replaced. Select Yes
to accept.
6 Your WiPOQ will take a few moments to
initiate partnership with your mobile.
14
link with 7 An alert will appear to tell you that your
®
phone is requesting a pincode. Enter the
4 digit PIN that you created during the
Startup Wizard on your WiPOQ first, and
secondly on your mobile.
8 When it has been successful, you may be
asked whether you want to synchronise the
time and date on the WiPOQ with your
mobile phone. Select Yes or No from the
Question? window using the Select key*.
Click the Back key to return to the
application screen.
TIP! In order to confirm the partnership
you may need to complete a few steps on
you mobile phone. Follow the instructions
given on your phone, or take a look at the
Bluetooth ® section in your phone's user guide
for more information.
*Some phones do not support this function.
Bluetooth ® LEDs
The status of your Bluetooth connection is
indicated by LED.
Blue pulsating light - The devices are
◆
successfully connected.
Red flashing - Bluetooth
◆ ® is on but the
connection has been lost.
No Blue LED - Bluetooth is off.
◆ ®
Bluetooth can be turned on and off using
®
the Bluetooth ® key at the top right of the
keyboard.
02
15