Audio Setup Menu - Yamaha DVX-1000 Owner's Manual

DVD setup menu options

■ Audio setup menu

1 In DVD/CD mode, press SET UP.
2 Press
/ to select [AUDIO SETUP PAGE].
3 Press ENTER to confirm.
AUDIO SETUP PAGE
HDMI AUDIO OUT
SPEAKER
CD UPSAMPLING
LIP SYNC
Setting the HDMI audio
When you connect the DVD receiver to an HDMI
compatible component via the HDMI terminal, set the
HDMI audio output to match the connected component.
For details about the relationship between the audio
format and the setting, see "HDMI audio output" on
page 16.
1 In [AUDIO SETUP PAGE], press
highlight [HDMI AUDIO OUT], then press
AUTO
Select this to set the DVD receiver to the best setting
automatically based on the component you have
connected via the HDMI terminal.
PCM
Select this to output the decoded multichannel or 2-
channel PCM audio signals via the HDMI terminal.
OFF
Select this to turn off the HDMI audio output.
2 Press
/ to select a setting and press ENTER
to confirm.
Note
If the monitor/receiver connected to the DVD receiver
using HDMI does not support HDMI audio signal
input, set this setting to [OFF].
Speaker setup
This menu contains setup options for audio output so that
you can set your speakers to reproduce high quality
surround sound.
36
En
CD upsampling
This feature allows you to convert your music CD to a
higher sampling rate using sophisticated digital signal
processing for better sound quality.
Note
When the CD upsampling function is activated (or a
disc recorded at the sampling rate of 96 kHz is played
back), the music enhancer function is not available.
1 In [AUDIO SETUP PAGE], press
highlight [CD UPSAMPLING], then press
OFF
Select this to disable CD-upsampling.
88.2 kHz (X2)
Select this to convert the sampling rate of CDs to
twice that of the original.
2 Press
to confirm.
Lip synchronization
/ to
This feature allows you to delay the sound output from the
.
front speakers in order to synchronize it with the video
image. This may be necessary when using certain LCD
monitors or projectors.
Choices: 0 to 200 ms
1 In [AUDIO SETUP PAGE], press
highlight [LIP SYNC], then press
2 Press
and 200 ms) and press ENTER to confirm.
/ to select a setting and press ENTER
/ to adjust the delay time (between 0 ms
/
to
.
/
to
.