4) In the GRN, BLU, or RED mode, move “
” up or down to
change the data in vertical direction, or move “
” to the left
or right to change the data in horizontal direction.
Data (H) Data (V)
Color
V-Frequency
GRN
000 000
60
CENT
Adjustment Item
5) When it moves from PJE to other categories, repeat “1” or
“4” button and press it.
3. Operation Method for Fine Adjustment
(in GRN, RED, or BLU Mode)
1) Set in the Service mode, and select the category “PJE”.
2) Select item “FDIS” so that the data at each position can be
displayed in the fine adjustment mode, and set the data to
“01”.
3) Press “9” button on the commander, and the fine adjustment
mode will be active where a green marker appears in the
center of screen. (in the case of GRN mode)
4) Push “
(ENTER)” button, and the marker color will be
switched between green (GRN mode) and white alternately.
5) Use “1” or “4” button on the commander, or the joystick to
move the marker to the position to be adjusted, where fine
adjustment can be made.
• When marker color is white.
(in this case, fine adjustment is disabled)
Operating the joystick can move the marker up, down, or to
the left or right freely.
• When marker color is green. (GRN mode)
1 : moves the marker clockwise from center to outside.
4 : moves the marker counterclockwise from outside to
center.