Connect To Your Tv; Setting Up Your Antenna - Philips SDV2740/27 User Manual

3.2 Connect to your TV
Connect one end of the coaxial cable to
1
signal output of the antenna and the other
end to the input on your TV receiver.
Connect DC plug to the antenna and the
2
power supply to a 120V AC outlet.
3.3 Setting up your antenna
Antenna can be set up on a flat surface (table)
on a horizontal or vertical position.
Note
D
Horizontal position for UHF and VHF.
Vertical position for UHF only, and keep the
dipoles to minimum length.
Horizontal position: Attach the stand to the
back of the antenna in a horizontal position
using the two screws provided.
Vertical position: Attach the stand to the back of
the antenna in a vertical direction using the two
screws provided.
4
Mounting on the Wall: Mount two wood screws
with center distance of 63 mm (2.5") into the
wall. Hang the two notch holes onto the two
wood screws on the wall.
4
2740_27.indb 4
1
2
3
5
1
TV
ANT.
2
3
4
5
5/8/08 2:43:20 PM