Chapter 3: Advanced Functions; Adjusting The Picture; Adjusting The Sound; Timer - Sanyo XT-32S7200H Owner's Manual

Adjusting the Picture

The menus for adjusting the picture are used to obtain the
best picture setting according to your preference, the type
of programme you are watching and the ambient lighting.
Press up or down button to select Picture in the
main menu.Press OK button or right button to enter
sub-menu.
Menu
Picture Mode
Contrast
PICTURE
Brightness
SOUND
Color
Hue

TIMER

Sharpness
Backlight
SETTINGS
Color Temperature
LOCK
Noise Reduction
ANTENNA
OK Access Select
Note: Some options may be not available for certain
signal sources.
Picture Mode: Use the up and down direction button to
select Picture Mode, then press the left or right direction
button to select the picture preset settings:Standard,
Cinema,Soft,User,Vivid or Sports.
Contrast: Adjusts the difference between the light and
dark areas of the picture.
Brightness: Adjusts the brightness of the picture.
Color: Adjusts the richness of color.
Hue:Adjusts the balance between the red and green
Note: Hue is available to be adjusted only when the
system of the video signal is NTSC.
Sharpness: Adjusts the crispness of the edges in the
picture.
Backlight:Adjusts the brightness of the back light,
depending on room lighting.
Color Temperature: Adjusts the color temperature of
the picture. Options include Medium, Warm and
Cool. Cool is for a more blue palette of picture colors;
Warm is for a more red palette of picture colors; Medium
is between the two.
Noise Reduction: Options include: Off, Low,Middle ,High.
Standard
50
50
50
50
50
100
Medium
Middle
MENU RETURN
Advanced Functions

Adjusting the Sound

Press MENU button to display the main menu.
Press down or up button to select Sound in the main
menu.Press OK button or right button to enter sub-menu.
Menu
Sound Mode
PICTURE Bass
Treble
SOUND
Balance
Audio Only
TIMER
Auto Volume Level
SETTINGS
LOCK
ANTENNA
OK
Access
The Sound menu allows you to adjust each option for
your listening pleasure.
Sound Mode: Options include Standard,Speech,User
Music,Cinema.
Bass: Adjusts the bass frequency settings.
Treble: Adjusts the Treble frequency settings.
Balance: Adjusts the volume between the left and right
speaker. Sets to "0 "in the normal condition.
Audio only: Press to select Audio Only Mode on or off.
Auto Volume level: Options include Off and On.
Timer
Press MENU button to display the main menu.
Press down or up button to select Timer in the main
menu.Press OK button or right button to enter
sub-menu.
Menu
Sleep Timer
PICTURE
OSD Timer
SOUND
TIMER
SETTINGS
LOCK
ANTENNA
OK Access
Sleep Timer
Sets a period of time after which the TV set goes into
standby mode.
OSD Timer
No action menu display time.
Note: When there is no signal, TV goes into stand-by mode
after 10 minutes automatically.
13
Standard
50
50
0
Off
Off
Select MENU RETURN
Off
20 S
Select
MENU RETURN