Necessary Repairing Tools - Makita DGA405 Technical Information

R
epair
CAUTION: Repair the machine in accordance with "Instruction manual" or "Safety instructions".

[1] NECESSARY REPAIRING TOOLS

Code No. Description
1R004
Retaining ring pliers ST-2
1R027 Bearing setting pipe 18-10.2
1R029 Bearing setting pipe 23-15.2
1R036 Bearing setting plate 17.2
1R045 Gear extractor (large)
1R258 V block
1R268
Spring pin extractor M3
1R269 Bearing extractor
1R280 Round bar for Arbor 6-50
1R286 Round bar for Arbor 12-50
1R291 Retaining ring S and R pliers
[2] LUBRICATION
Apply Makita grease R No.00 to the following portions designated with the black triangle to protect
parts and product from unusual abrasion.
Item No. Description
5 O ring 26
14 Gear housing
Fig. 1
removing/assembling Ring spring 11 from/to Spindle
assembling Rotor to Ball bearing 629LLB in Gear housing cover.
removing Ball bearing 6201DDW from Bearing box
assembling Spiral bevel gear 37 to Spindle
supporting Spindle when assembling Spiral bevel gear 37 to Spindle
disassembling Rotor from Gear housing cover
supporting Bearing box when removing Spindle from Spiral bevel gear 37
disassembling Pin 4 from Pin cap
removing Ball bearing 607LLB and 696ZZ
disassembling Spindle from Bearing box
disassembling Ball bearing 629LLB from Gear housing cover
disassembling/assembling Retaining ring R-32 from/to Bearing box
Inner periphery that appears from Gear housing cover
Gear room for Spiral bevel gear 37 and Spiral bevel gear 10
Spiral bevel gear 10
Use for
Portion to lubricate
5
Spiral bevel gear 37
14
P 2/ 11
Amount
a little
9 g