Download Print this page

Kenmore 795.69292.902 Service Manual page 28

Hide thumbs

Advertisement

Table of Contents
8-1-5 TEST MODE
1. Test mode allows checking the PCB and the function of the product as well as determining the Defective part in case of an
error.
2. The test button is on the main PCB of the refrigerator (Test S/W).
3 While in the test mode, the ADJUST button will not operate.
4. After exiting the test mode, be sure to reset by unplugging and plugging in the appliance,
5. If an error, such as a sensor failure is detected while in the test mode, the test mode is cleared and the error code is
displayed.
6. While an error code is displayed, the test mode will not be activated.
MODE
TEST 1
TEST
Push the test button
Once while in TEST
RESET
MODE 2
Key Control
Push the test
button once
Push the test
button once while
in TEST MODE 1
Operation
1) Continuous operation of the
COMP, Freezer FAN
and Cooling FAN.
2) DEFROSTING HEATER OFF
3) ALL DISPLAY ON
4) LAMP RELAY ON/OFF
OPERATED BY DOOR SWITCH
1) COMP OFF
2) Freezer FAN and Cooling
FAN OFF
3) Defrosting Heater ON
4) 1, 3, 5 LED ON
Reset to the default settings
(Compressor will delay 7
minutes for Power ON)
- 28 -
Remarks
*The maximum
time for TEST 1
is 5 min.
Ref.
Temp.
Display
:ON
:OFF
Operate max 1 Hr

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for Kenmore 795.69292.902