Programming Channel Memory - Toshiba 34JH9UH Service Manual

• First, use the Auto tuning feature to preset all the active channels in your area automatically. Then,
arrange the preset channels with the Manual tuning feature so that you can tune in only desired
channels.
• Use the Channel search operation if desired channels cannot be preset with the Auto tuning or if
you would like to preset channels to specific position numbers one by one.
To preset channels
Auto tuning
1
Press the MENU button, then
press the or button to
display the SET UP menu.
Press the or button to
select Auto tuning.
2
Press and hold the OK button
for several seconds to start
the automatic search.
The search will begin for all
available stations.
Bullet will move along the line as the search progresses.
DO NOT PRESS ANY BUTTONS WHILE THE AUTOMATIC
SEARCH IS IN PROGRESS.
If you make a mistake, simply repeat steps 1-2 to start
again from the beginning.
3
When the automatic search is complete, the TV will
automatically return to the first program position.
4
Press the CH8 or CH9 button to view the programmed
position.

PROGRAMMING CHANNEL MEMORY

SET UP
Language English
Auto tuning OK
Manual tuning OK
Program sor ting OK
Geomagnetic
0
MENU Back EXIT Watch TV
Auto tuning
Searching
Pos: 2
EXIT Cancel
- 21 -
Manual tuning
1
Press the MENU button, then
press the or button to
display the SET UP menu.
Press the or button to
select Manual tuning.
2
Press the OK button to display
the Manual tuning menu.
Press the or button to
select the program position
you want to arrange.
3
Press the OK button to display
the breakdown menu.
Press the or button to
select an item, then press
the or button to select
the item as shown below.
Manual tuning
Program
1 I A
Store MENU Back EXIT
B D F
A
C E
A. Program position selection
B. Sound system (see page 31)
C. Color system (see page 31)
A : Automatic, P : PAL, S : SECAM,
N4 : NTSC4.43 (MHz), N3 : NTSC3.58 (MHz)
If the color of a certain channel is abnormal, the
automatic color system selection (A) may have
malfunctioned, or the sound system selection is
wrong. In such a case, select another color and/or
sound system (see page 31).
D. Program position skip selection
Press the or button to turn the program
position skip option on "
The program position will then be skipped when
you select channels with the CH8 or CH9 button.
The " " mark will appear beside a program
position number when you use the number button
on the remote control.
E. Channel search operation
SET UP
Language English
Auto tuning
Manual tuning
Program sor ting
Geomagnetic
0
Back Watch TV
MENU EXIT
Manual tuning
Prog. Sys. Label
1 I
2 I
3 I
4 I
5 I
6 I
Select
MENU Back EXIT Watch TV
Manual tuning
Program
1 I A
Store MENU Back EXIT Watch TV
Watch TV
H
G
" or off " ".
OK
OK
OK