Wiring Connection - Kenwood KDC-300UVM Instruction Manual

Wiring connection

Connecting the ISO connectors on some VW/Audi or Opel
(Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring harness as
illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
Pin Color and function
: Battery
A4 Yellow
: Power control
A5 Blue/White
: Ignition (ACC)
A7 Red
: Earth (ground) connection
A8 Black
B1 Purple ]
: Rear speaker (right)
Purple/black [ For 3-way crossover: Tweeter (right)
B2
Gray ]
B3
: Front speaker (right)
For 3-way crossover: Mid range speaker (right)
Gray/black [
B4
White ]
B5 : Front speaker (left)
For 3-way crossover: Mid range speaker (left)
B6 White/black [
Green ]
B7
: Rear speaker (left)
For 3-way crossover: Tweeter (left)
Green/black [
B8
Rear/ Front/ Subwoofer output
For 3-way crossover: Tweeter/ Mid Range/ Woofer output
Antenna terminal
Ignition wire (Red)
Unit
Battery wire (Yellow)
Fuse (10 A)
Yellow (Battery wire)
If no connections are made, do not let the wire come out from the tab.
Red (Ignition wire)
Light blue/yellow
(Steering remote control
wire)
Red (A7)
Blue/White
(Power control wire/
Yellow (A4)
Antenna control wire)
Brown
(Mute control wire)
ISO connectors
If your car does not have an ISO
terminal :
We recommend installing the unit with
a commercially available custom wiring
harness specific for your car and leave
USB cable
this job to professionals for your safety.
(DC 5 V 1.5 A)
Consult your car audio dealer.
When connecting to an external
amplifier, connect its ground wire to the
car's chassis to avoid damaging the unit.
STEERING WHEEL
REMOTE INPUT To the steering wheel remote control
REMOTE CONT adapter
To the power control terminal when
ANT CONT
using the optional power amplifier or
P. CONT
to the antenna control terminal in the
vehicle
To the terminal that is grounded
MUTE when the telephone rings or during
conversation ( 15)
(To connect the Kenwood navigation
system, refer your navigation manual.)
19
ENGLISH