Wireless - D-Link DIR-882 User Manual

Section 4 - Configuration
From this page you can configure your wireless network settings.
Smart Connect
Smart Connect: Enable or disable the Smart Connect Feature. When enabled, only
a few configuration options are available to simplify configuration.
Wi-Fi Name (SSID): Create a name for your wireless network using up to 32 characters.
Password: Create a password to use for wireless security. Wireless clients will
need to enter this password to successfully connect to the network.
Advanced Settings
Security Mode: Choose None or WPA/WPA2-Personal (recommended).
Transmission Select the desired wireless transmission power.
Power:
Schedule: Use the drop-down menu to select the time schedule that the rule
will be enabled for. The schedule may be set to Always Enable, or
you can create your own schedules in the Schedules section. Refer
to Schedule on page 82 for more information.
Wi-Fi Protected Setup
The easiest way to connect your wireless devices to the router is with Wi-Fi Protected Setup
(WPS). Using WPS-PIN is disabled by default due to security vulnerabilities.
WPS-PBC Status:
Enable or disable WPS-PBC (Push Button Configuration) fuctionality.
WPS-PIN Status:
Enable or disable WPS-PIN fuctionality.
Refer to the next page if you wish to disable Smart Connect or click
Save when you are done.
D-Link DIR-882 User Manual

Wireless

61