Mitsubishi Electric AJ65SBT2B-64DA User Manual page 3

[Design Precautions]
Configure a safety circuit so that the safety of the overall system is
maintained even if an external power failure or a programmable controller
failure occurs.
Incorrect output or malfunction can lead to an accident.
(1) The status of analog output changes depending on the setting of various
functions that control the analog output. Take sufficient caution when
setting for those functions.
For details of analog output status, refer to Section 3.4.1 "Combinations
of functions in each part" in the User's Manual.
(2) Normal output may not be obtained due to malfunctions of output
elements or the internal circuits.
For output signals that may cause a serious accident, provide an
external monitoring circuit.
Do not install the control or communication cable(s) together with the main
circuit or power cables.
Keep a distance of 100mm or more between them.
Failure to do so may cause malfunctions due to noise.
At power ON/OFF, voltage or current may instantaneously be output from the
output terminal of this module.
In such case, wait until the analog output becomes stable to start controlling
the external device.
WARNING
CAUTION
A-2