The MiniVac controller front panel controls are shown
in the following figure.
Mini Vac
8
7
6
MiniVac Front Panel Controls
1.
High Load LED lights up when the pump current is
higher than 12 mA.
2.
Output polarity LEDs selection indicators.
3.
Voltage output scale (kV).
4.
Controller power ON/OFF switch.
5.
Current/voltage LED's bar graph
indicator.
6.
H. V. ON LED.
7.
Recorder output connector.
8.
Pump current scale (mA).
1
2
3
4
5
The MiniVac controller rear panel controls are shown in
the following figure.
1
MiniVac Controller Rear Panel Controls
1.
Controller power entry module consisting of mains
fuses, voltage change over, mains socket.
2.
High
voltage
FISCHER type).
3.
Accessory connector for input/output signals.
14
TECHNICAL INFORMATION
2
output
connector
(KINGS
87-900-049-01 (E)
3
or