Tuner - Philips FW D5 User Manual

DVD MINI HIFI SYSTEM
STANDBY
ON
FTS TITLE CHAP. CHAP. FM LW
P1 P2 P3
POWER SAVE
IR SENSOR
VCD • CD CD 1 • 2 • 3
DVD CD
SEARCH•TUNING STOP•CLEAR
CLOCK/
PROG DIM
TIMER
DVD
AXIS OK
DVD JOG
Note:
– For 'EASY SET' feature, please refer to
page 14.
Tuning to radio stations
1 Press TUNER (BAND) to select TUNER
mode.
™ "TUNER" will be displayed.
A few seconds later, the current radio
frequency will be displayed.
2 Press TUNER (BAND) again to select
the desired waveband : FM, MW or LW.
3 Press à or á for more than one
second, then release.
™ The display will show "SEARCH"
until a radio station with sufficient
signal strength is found.
1pg 01-42/D5/22-Eng new 35
NEWS / T.A.
LEFT CENTER RIGHT
A M W SLEEP SLEEP DIM TIMER
P4 P5 P6
SURR CHANNEL SURR
RDS / CD TEXT
SURROUND CONTROL
5.1CH / STEREO / SURR / 3D
BAND CDR

TUNER

AUX
L PRESET L
PLAY PAUSE PREV SIDE NEXT
VOLUME
DVD
MENU
SOUND JOG
• Repeat this procedure until the desired
radio station is reached.
• To tune to a weak radio station, briefly
press à or á repeatedly until the
display shows the desired frequency
and/or when the best reception has
been obtained.
Storing Preset Stations
You can store up to 40 radio stations in the
memory. When a preset radio station is
selected, the preset number appears next
to the frequency on the display.
Automatic programming
1 Press TUNER (BAND).
2 Press PROG for more than one second.
™ The starts flashing and "AUTO"
PROG
will be displayed.
™ The system will start searching for all
radio stations with RDS and then
followed by radio stations on FM,
MW and LW band respectively.
™ All available radio stations will be
stored automatically. The frequency
and preset number will be displayed
briefly.
™ The system will stop searching when
all the available radio stations are
stored or when the memory for 40
preset radio stations is used.
™ The system will remain tuned to the
last stored preset radio station.
Notes:
– You can cancel the automatic
programming by pressing PROG or Ç
(on the system only).
9/14/00, 8:37 AM
TUNER
– If you want to reserve a section of
preset numbers, for example preset
numbers 1 to 9, select preset 10 before
starting automatic programming, only
the preset numbers 10 to 40 will be
programmed.
Manual programming
1 Press TUNER (BAND).
2 Press TUNER (BAND) again to select
the desired waveband : FM, MW or LW.
3 Press PROG for less than one second.
™ The starts flashing.
PROG
™ The next available preset number will
be displayed for selection.
4 Press à or á to tune to the desired
frequency.
• If you wish to store the radio station to
another preset number, press í or ë
(or Digit 0-9 on the remote control) to
select the desired preset number.
5 Press PROG again.
™ The disappears and the radio
PROG
station will be stored.
• Repeat steps 3 – 5 to store other preset
radio stations.
Notes:
– When 40 radio stations are stored and
you attempt to store another radio
station, the display will show
" PROGRAM FULL ". If you want to
change an existing preset number,
repeat steps 3 – 5.
3139 115 20032
35