Removing The Cn Board; Removing The Power Supply Unit - JVC TK-C675BU Service Manual

(6) Remove the 2 spacers R .
(7) Remove the MD. INSULATOR Q and remove the MD SUB
board.
Fig. 1-14

1.4.4 Removing the CN board

(1) Remove the 5 screws 10 and pull out the chassis assembly
in the direction of the arrow.
Fig. 1-15
(2) Disconnect CN1 S , CN2 T and CN4 U from the CN
board, remove the 3 screws 11 , and remove the CN board.
CN boad
11
Fig. 1-16
1-4
Q
R
10
U
S T

1.4.5 Removing the power supply unit

(1) Remove the screws and disconnect the connectors as de-
scribed in 1.4.4.
(2) Remove the 2 screws 12 .
Fig. 1-17
(3) Remove the screw 13 and remove the power supply unit V .
Fig. 1-18
V
12
13