Electrical Adjustments; Equipment Necessary For Adjustment; Computer And Peripheral Equipment - JVC TK-C675BU Service Manual

This unit is a camera incorporating an EVR (Electric Variable
Resistor) function. The EVR varies the resistance using a PC
and writes the varied resistance data in the memory of the cam-
era.

2.1 EQUIPMENT NECESSARY FOR ADJUSTMENT

Instrument
Oscilloscope Available for 100MHz or higher
Vectorscope A calibrated instrument.
Color video monitor A color type instrument with a 75 ohm
video input.
Digital voltmeter Input impedance of 10M ohm or higher
Program disk
(Software for adjustment)
(IBM-PC)
PLSC1209
Light box lamp
YQ20645-001
Light box
YTU93072
* When used with TK-C675BU/E, it does not display "Camera Model" and "Camera ID".
2-1

ELECTRICAL ADJUSTMENTS

Condition
Program disk
(Remote control software)
(Windows 95)
* PLSC1210
Infinity adjustment lens
YTU92001B
Color temp. Conversion filter
KODAK wratten gelatin filter
No. 80C (or equivalent)
SECTION 2

2.2 COMPUTER AND PERIPHERAL EQUIPMENT

• IBM PC/AT or compatible with MS-DOS operating system (For
Adjustment)
• 3.5inch FDD
• Serial port (RS232C)
• CPU:80386 or higher microprocessor
• VGA monitor (color or monochrome)
• Mouse
• WINDOWS 95 operating system (For Remote Control)
• 3.5inch FDD
• Serial port (RS232C)
• VGA monitor
• Mouse
Conversion cable Interface cable
SC32124
Color bar chart Gray scale chart
YTU92001-051
Lens mount tool
SC32125 (Included in Infirity adjustment lens.)
Conversion cable
(For IBM-PC)
YTU93063 YTU94066
Test chart (Portrait)
(Not necessory for adjustment)
YTU92001-052 YTU92001-054
Focus chart Camera Stand
YTU93079