When using the engine sprocket for the racing kit, combine it with the dedicated collar and
be careful of the direction of the sprocket. Install the sprocket so that the teeth number mark
("16" or "17") faces to the outside of the body.
A: Engine Sprocket 13144-0021(16T) or 13144-0022(17T)
Install the sprocket so that the teeth number mark ("16" or "17") faces to the outside of
B: Dedicated Collar 92152-1522
with identification groove
With recommended muffler engine performance can be improved.
Recommended muffler: LeoVince
For further information contact the manufacture of muffler directly.
2011 model ZX-10R racing kit provides the recommended radiator to improved the
Recommended radiator: Taleo Tecnoracing-made
For further information about the radiator, contact the manufacturer directly.
Water Temperature Sensor
The original water temperature sensor installed in the cylinder head must be remain and
connected to the main harness because the electronic control unit (E.C.U.) needs the
output signal from the original water temperature sensor. Be sure to connect the water
temperature sensor to the main harness (either race kit main harness for race kit E.C.U or
original main harness for original E.C.U).
: http://www.leovince.com (LeoVince)