Download  Print this page

To Clean Monitor And Touch Screen; To Clean External Surfaces; Touch Screen Calibration; To Calibrate The Touch Screen - Philips epiq 5 Training Manual

Hide thumbs


Do not use glass cleaners,
Dispatch spray, or
products containing
bleach or alcohol on LED
displays. Repeated use of
such cleaners or products
may damage the monitor
and touch-screen
Note: Paper towels can
damage the LCD screen
You must reboot the
system after performing
the calibration procedure.
Warning: Do not change
screen orientation until
this procedure has been
various disinfectants. If fluids are splattered on the screens they
should be wiped clean with a soft cloth as soon as possible to avoid
spots on the display.

To Clean Monitor and Touch Screen:

 For routine cleaning use only LCD screen cleaning products.
 Disinfectants may be used if necessary but should not be used
 Philips recommends using microfiber cloth for all cleaning.
 Philips recommends using microfiber cloth for all cleaning.
 Pre-moistened screen wipes may also be used.

To Clean External Surfaces:

 A cloth with mild soap and water is recommended for external
 Rubbing alcohol may be used for ink or other stains.
 Acetone and other strong solvents will damage the exterior
plastic covers.

Touch Screen Calibration

Touch screen calibration should be performed during preventive
maintenance procedures or after touch screen replacement.

To calibrate the touch screen:

 Press Support.
 Click
 A dialog box will remind you to reboot the system when you exit
SupportConnect select Yes.
 In the
Interactive Utilities
Test. A message that the previous calibration data was
successfully removed will appear. Click OK.
© 2016 Conquest Imaging
EPIQ 5 & 7 Training Manual
display, click
Touch Screen


Table of Contents

This manual is also suitable for:

Epiq 7

Comments to this Manuals

Symbols: 0
Latest comments: