Removing Clogs - Kenmore 125.10135610 Use & Care Manual

TO REMOVE CLOG FROM HOSE
Frequently check air path to make sure it
is free of obstructions
1. Press WAND
RELEASE button.
2. Pull up to
release wand.
3. Lift wand from
vacuum cleaner
4. Plug in the vacuum cleaner and turn it
on.
5. Stretch the extension hose to maximum
length and then allow the hose to return
to its natural length.
6. Reinstall hose and wand onto vacuum
cleaner. See ASSEMBLY (pages 6).
TO REMOVE CLOG FROM FLOOR/TOOL
SELECTOR
Frequently check FLOOR/TOOLS selector
to make sure it is free of obstructions.
1. Press tabs on FLOOR/TOOLS selector
cover and remove.

REMOVING CLOGS

2. Remove
FLOOR/TOOLS
selector and
clean any debris
or clogs located
in valve area.
3. Reinstall FLOOR/TOOLS selector cover.
Make sure tabs snap into place. A
noticeable click should be heard.
TO REMOVE CLOG FROM PET
HANDIMATE
To reduce the risk of injury from
moving parts, remove Pet HandiMate
from vacuum hose or wand before
servicing.
Frequently check air
path to make sure it
is free of obstruction.
Remove any clogs or
residue in air path.
- 20 -
3. Reinstall
FLOOR/TOOLS
selector as
shown.
CAUTION