Kenmore 125.10135610 Use & Care Manual page 14

WARNING
Always unplug power cord from
electrical outlet before performing
any service on vacuum cleaner.
TO REMOVE DUST CUP
1. Lift dust cup handle located at the top
of the dust cup.
2. Pull the dust cup handle up and lift dust
cup up and out of the vacuum cleaner.
3. Remove any
clogs that might
be located in the
suction port or
filter port area.
EMPTYING DUST CUP
TO EMPTY DUST CUP
1. Raise dust cup handle to the vertical
position.
2. Hold dust cup over a trash container.
3. Press the dust
cup latch
downward to
release the door.
The door will
swing open and
the debris will
fall into the trash
container.
4. Shake the dust
cup to release
any debris that
might hang in the
pre-filter.
TO REINSTALL DUST CUP
1. Place dust cup
back into vacuum
cleaner by inserting
the bottom first and
tilting back with the
dust cup handle
raised.
- 14 -
5. After the dust cup is
empty of debris, firmly
close the door. Make
sure you hear a "click"
sound to indicate that
the door is fully
latched.
2. Lower the dust
cup handle to
lock dust cup in
place. A
noticeable
"click" should be
heard.