To enter the remote access mode, dial your phone
number from another phone, when you hear the
announcement, press TONE/* and then enter the 4-digit
remote security code (default code is 0000).
The correct sequence of the 4 security PIN digits needs
to be detected before entering remote access mode.
Random digits detected prior to the correct 4 digits
sequence are ignored, and answering machine
recording continues until the complete PIN is detected.
There is no system prompt to enter the remote access
Press the following keys on your handset to perform the
following functions, after entering your remote access
Skip forward to the next message
Toggle Answer Off/Announce Only/
Announce and Record modes
Listen to the Main Menu (for Full Voice
Using the phone
4.23.11 Set the security code
This is used to change the remote access PIN if
1. Press MENU and VOL+ or REDIAL/VOL- to select
2. Press MENU and VOL+ or REDIAL/VOL- to select
3. Press MENU and enter the 4-digit security code.
4. Press MENU to save.