Fuel Tap Inspection
Remove the fuel tap .
Check the fuel tap filter screens [A] for any breaks or
*If the fuel tap screens have any break or
they may allow
rBach the carburetor, causing poor
Replace the fuel
1' the fuel tap leaks, or allows fuel to flow when
is at the OFF
position. replace the damaged O-rings [B]
Fuel Tank and Tap Cleaning
Clean the tank
In a well-ventilated area,
the wortd ng area. Because
danger of highly flammable
liquids, do not use gasoline or low
Remove the fuel tank and drain
Pour some high flash-point solvent into the fuel tank and shake the
tank to remove dirt and fuel
Pour the solvent out of
Remove the fuel tap from the tank by taking out the bolts
Clean the fuel tap fil ter screen in a high flash-point solvent .
Pour a high flash -point solvent through the tap in all lever positions.
Dry the tank and tap wi th compressed air .
he tap in the tank .
Install the fuel tank.