Download  Print this page

Advertisement

SUPPLEMENT - 2002 MODEL 7-5
eran kshaftfTransmission
Specifications
Item
Standard
Transmission Oil:
Type
API SE, SF or SG
Viscosity
Capacity
API SH or SJ with JASO MA
SAE 10W-40
Level
Transmission Oil
Oil Change
0.65 L (0.69 US qt) (when changing oil)
0.7 L (0.74 US qt) (when engine is completely dry)
Between u per and lower level line
• Warm up the engine thoroughly so that the oil will pick up
any sediment and drain easily. Then stop the engine.
• Place an oil pan beneath the engine.
• Remove the transmission drain plug [A] on the bottom of
the engine, and let the oil drain completely.
NOTE
o
Hold the motorcycle upright so that the oil may drain
completely.
• Check the gasket at the drain plug for damage.
*Replace the gasket with a new one if it is damaged.
• After the oil has completely drained out, install the drain
plug with the gasket, and torque it.
Torque - Transmission Drain Plug: 20 N·m (2.0 kgf.m, 14.5
ft·lb)
• Fill the engine with a good quality motor oil specified.
• Check the oil level.
CAUTION
Measure the oil amount correctly according to the
table and pour in the oil.
Recommended Transmission Oil
Type:
API SE, SF or SG
API SH or SJ with JASO MA
Viscosity:
SAE 10W-40
Capacity:
0.65 L (0.69 US qt) (When charging oil)
0.7 L (0.74 US qt) (When engine is completely
dry)
Service Limit

Advertisement

Table of Contents

   Also See for Kawasaki KDX200

This manual is also suitable for:

Kdx220 1995-2006

Comments to this Manuals

Symbols: 0
Latest comments: