Download  Print this page

Stem, Stem Bearing Remova1 - Kawasaki KDX200 Service Manual

Hide thumbs

Advertisement

.
Mount the handlebar clamps
[A]
so that the
arrow
marks
[8]
on the
clamp
pOlms to
the
front (C]
.
• Install the
longer clamp
bolts
[D] on
the right
side clamp.
Tighten the handlebar clamp
bolts.
Torque
-
Handlebar
Clamp
Bolts: 25 N·m (2.5 kg-m, 18.0 ft-Ib)
OTighten the front clamp bolts first. and Ihen the rear. If the handlebar
clamp is correctlv installed, there will be no gap
[6]
at the front [A]
and a gap
[CJ
at the rea
r
after tightening.
Stem, Stem Bearing Removal
Remove:
Headlight and Meter Unit
Master Cylinder Clamp
Front Fender
Handlebar
Front Wheel
Front Fork
Remove the steering stem head nut and washer.
Remove the steering stem head .
Pushing up
on
the stem base
[A].
remove the
steering
stem nut [B],
with the steering stem nut wrench
[D).
then remove the
steering
stem
[C]
and stem base.
Special
Tool
-
Steering Stem Nut
Wrench: 57001-1100
[0]
.
Take off the upper
stem
bearing
inner
race
(tapered
roller bearing)
[Al·
STEERING 12-5
1

Advertisement

Table of Contents

   Also See for Kawasaki KDX200

This manual is also suitable for:

Kdx220 1995-2006

Comments to this Manuals

Symbols: 0
Latest comments: