Download Print this page

Philips BGA6589 Datasheet

Philips mmic wideband medium power amplifier datasheet

Advertisement

Quick Links

DISCRETE SEMICONDUCTORS
DATA SHEET
book, halfpage
M3D109
BGA6589
MMIC wideband medium power
amplifier
Product specification
2003 Sep 19

Advertisement

loading

Summary of Contents for Philips BGA6589

  • Page 1 DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D109 BGA6589 MMIC wideband medium power amplifier Product specification 2003 Sep 19...
  • Page 2 1 dB compression L 1 dB This product is supplied in anti-static packing to prevent damage caused by electrostatic discharge during transport and handling. For further information, refer to Philips specs.: SNW-EQ-608, SNW-FQ-302A and SNW-FQ-302B. 2003 Sep 19 PINNING...
  • Page 3 Philips Semiconductors MMIC wideband medium power amplifier LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134) SYMBOL PARAMETER DC device voltage DC supply current total power dissipation storage temperature operating junction temperature maximum drive power Note 1. T is the temperature at the soldering point of pin 2.
  • Page 4 Philips Semiconductors MMIC wideband medium power amplifier CHARACTERISTICS = 9 V; I = 84 mA; T = 25 C; IP3 = 50 unless otherwise specified. SYMBOL PARAMETER insertion power gain return losses input L IN return losses output L OUT noise figure...
  • Page 5: Application Information

    APPLICATION INFORMATION Figure 2 shows a typical application circuit for the BGA6589 MMIC. The device is internally matched to 50 , and therefore does not require any external matching. The value of the input and output DC blocking capacitors C1 and C2 depends on the operating frequency;...
  • Page 6 Philips Semiconductors MMIC wideband medium power amplifier handbook, full pagewidth = 84 mA; V = 9 V; P = 30 dBm; Z handbook, full pagewidth = 84 mA; V = 9 V; P = 30 dBm; Z 2003 Sep 19 2.6 GHz...
  • Page 7 Philips Semiconductors MMIC wideband medium power amplifier handbook, halfpage s 12 (dB) 1000 1500 = 84 mA; V = 9 V; P = 30 dBm; Z Fig.5 Isolation (|s ) as a function of frequency; typical values. handbook, halfpage P L1dB...
  • Page 8 Philips Semiconductors MMIC wideband medium power amplifier handbook, halfpage (dB) 1000 1500 = 84 mA; V = 9 V; Z = 50 Fig.9 Noise figure as a function of frequency; typical values. handbook, halfpage (mA) = 8 V; R = 51 bias Fig.11 Supply current as a function of operating...
  • Page 9 white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader. white to force landscape pages to be ... Scattering parameters = 83 mA; V = 8 V; P = 30 dBm; Z = 50 ;...
  • Page 10: Package Outline

    Philips Semiconductors MMIC wideband medium power amplifier PACKAGE OUTLINE Plastic surface mounted package; collector pad for good heat transfer; 3 leads DIMENSIONS (mm are the original dimensions) UNIT 0.48 0.53 0.35 0.40 OUTLINE VERSION SOT89 2003 Sep 19 scale 0.44 4.25...
  • Page 11: Data Sheet Status

    2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
  • Page 12 Contact information For additional information please visit http://www.semiconductors.philips.com. For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. © Koninklijke Philips Electronics N.V. 2003 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.