Mute; Sound Control; Equalizer; Bass Adjustment - Philips WACS700 User Manual

Basic functions

MUTE

During playback, you can temporarily switch off
the sound without switching off the set.
1
Press MUTE to switch off the sound
➜
The icon appears. Playback continues
without sound
2
To switch on the sound, press MUTE again or
adjust the volume with VOL +/-
– You can also switch on the sound by activating
MUSIC BROADCAST on the Center.
➜
The icon disappears
SMART EQ

Sound control

Equalizer

Equalizer enables you to select predefined
sound settings.
1
Press MENU to enter the MENU screen
2
Use the navigation controls 3 or 4 and 2
to select Equalizer
3
Press 3 or 4 and 2 to select Rock,
Pop (default), Jazz, Neutral, Techno,
Classical or Bass/Treble
4
Press OK or 2 to confirm
28
SAME ARTIST

Bass adjustment

●
Press DBB (Dynamic Bass Boost) once or
more to select your option: DBB OFF (by
default), DBB 1, DBB 2 or DBB 3
●
To select Treble/Bass options:
1
Press MENU to enter the MENU screen
2
Use the navigation controls 3 or 4 and 2
to select Settings
3
Press 3 or 4 and 2 to select Treble/Bass
4
Press 1 / 2 / 3 / 4 to select your options:
Treble (+3 to -3), Bass (+3 to -3)
Helpful hints:
– Some discs might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce
the volume.

Incredible surround

●
Press Incr. Surr. once or more to turn the
surround sound effect on or off
➜
Display shows IS ON or IS OFF
SMART EQ
SAME ARTIST SAME ARTIST