1. ENTERING TO SERVICE MODE
1) Press o button once on
2. DISPLAYING THE ADJUSTMENT MENU
1) Press MENU button on TV.
3. KEY FUNCTION IN THE SERVICE MODE
The following key entry during display of adjustment menu provides special functions.
A single horizontal line ON/OFF:
Test signal selection :
Selection of the adjustment items :
Change of the data value :
Adjustment menu mode ON/OFF :
Initialization of the memory (QA02) :
Reset the count of operating protect
circuit to "00":
"RCUT" selection :
"GCUT" selection :
"BCUT" selection :
"CNTX" (or "SCNT") selection :
"COLC" selection :
"TNTC" selection :
"SBY" selection :
"SRY" selection :
Self diagnostic display ON/OFF :
CAUTION : Never try to perform initialization unless you have changed the memory IC.
2) Press o button again to
- / - - button (on Remote) or a button (on TV)
a button (on Remote)
Channel s/t (on TV or Remote)
Volume ; +/– (on TV or Remote)
MENU button (on TV)
CALL + Channel button on TV (s)
CALL + Channel button on TV (t)
– 6 –
3) While pressing the o button,
press MENU button on TV set.
(Service mode display)
Color thickness correction
note: Displayed differently as shown below, depending
on the setting of the receiving color system.